网站首页
|
关于我们
|
产品展示
|
工程实例
|
在线留言
|
联系我们
关于我们
公司简介
企业荣誉
企业文化
生产工艺
安装事项
 
安装事项 您现在的位置:网站首页 > 关于我们 > 安装事项    

离心球墨铸铁管之安装 Mounting of Centrifugal Ductile Cast Iron Pipes
  徐州恒信球墨铸管有限公司之产品,采用方便的T型滑入式柔性接口,具有出色的抗震性能、密封性能喝防腐性能。在遇到地形发生变化时,埋在地下的铸铁管沿轴线允许偏转3-5度角。球墨铸铁管适合在各种地形和气候条件下施工安装。简捷的安装方法必能加快工程进度,降低施工成本,较之钢管施工,可降低其费用1/3。
  Our products use convenient and soft T-type socket joint and possess excellent properties of antknocking,sealness and anticorrosion.Being situated in topography change mounting axial line could be changed within 3-5.both ductile cast iron pipe and fitting are suitable for mounting under the different topography and climate situation .Simple monting method enables to quicken the pace of project and reduce the construction cost.Comparing with steel pipe,the cost of installation could be reduced by one-third
产品运输、储存、装卸注意事项 The cautions of products about diliver,strage,loading and unloading
  A、球铁馆在装车时,伸出车体外部分不得超过球铁管长度四分之一。
  B、在装卸的过程中要轻吊轻放,严禁在车上向地面抛卸。
  C、球铁管在搬运和堆放过程中,严禁硬物及球铁管相互间的碰撞。
  D、管架上每层球铁管应将承插口相间平放并用木块垫好,上下层管方向垂直。
  E、存放球铁管的地面应平坦松软,硬地面应垫木块。
  A.When loading,the length for out of the truck must be less one fourth of the total length .
  B.Must gently when loading and unloading ,must not no throw on the floor.
  C.wWhen Carring and stacking,must not conllide each other and with other hard objects .
  D.Please carefully stack with block underlaying on shelf.closed layer put vertically each other .
  E.The floor fourth storage should be soft and plane,should underlay with block on hard floor


 

版权所有:北京津唐恒信铸管销售有限公司        京ICP备19055418号-1 设计制作:无忧网络